Nginx stream server traffic status module

Nginx stream server traffic status module

Table of Contents

• Version
• Dependencies
• Screenshots
• Installation
• Synopsis
• Description
• Control
  • To get status of traffic zones on the fly
    • To get fully zones
    • To get group zones
    • To get each zones
  • To reset traffic zones on the fly
    • To reset fully zones
    • To reset group zones
    • To reset each zones
  • To delete traffic zones on the fly
    • To delete fully zones
    • To delete group zones
    • To delete each zones
• JSON
  • Json used by status
  • Json used by control
• Variables
• Limit
  • To limit traffic for server
  • To limit traffic for filter
  • To limit traffic for upstream
• Use cases
  • To calculate traffic for individual country using GeoIP
• Customizing
  • To customize after the module installed
  • To customize before the module installed
• Directives
  • stream_server_traffic_status
  • stream_server_traffic_status_zone
  • stream_server_traffic_status_display
  • stream_server_traffic_status_display_format
  • stream_server_traffic_status_display_jsonp
  • stream_server_traffic_status_average_method
  • server_traffic_status
  • server_traffic_status_zone
  • server_traffic_status_filter
  • server_traffic_status_filter_by_set_key
  • server_traffic_status_filter_check_duplicate
  • server_traffic_status_limit
  • server_traffic_status_limit_traffic
  • server_traffic_status_limit_traffic_by_set_key
  • server_traffic_status_limit_check_duplicate
  • server_traffic_status_average_method
  • server_traffic_status_histogram_buckets
• See Also
• TODO
• Donation
• Author

Version

This document describes nginx-module-sts v0.1.1 released on 04 Jul 2018.

Dependencies

• nginx
• nginx-module-stream-sts

Compatibility

• Nginx
  • 1.11.5 <= (last tested: 1.15.0)

Earlier versions does not work.

Screenshots

Installation

1. Clone the git repository.

shell> git clone git://github.com/vozlt/nginx-module-sts.git

shell> git clone git://github.com/vozlt/nginx-module-stream-sts.git

2. Add the module to the build configuration by adding

--with-stream
--add-module=/path/to/nginx-module-sts
--add-module=/path/to/nginx-module-stream-sts

3. Build the nginx binary.

4. Install the nginx binary.

Synopsis

http {
    stream_server_traffic_status_zone;

    ...

    server {

        ...

        location /status {
            stream_server_traffic_status_display;
            stream_server_traffic_status_display_format html;
        }
    }
}

stream {
    server_traffic_status_zone;

    ...

    server {
        ...
    }
}

Description

This is an Nginx module that provides access to stream server traffic status information. This is a porting version of the nginx-module-vts to the NGINX "stream" subsystem so as to support the same features in nginx-module-vts. It contains the current status such as servers, upstreams, user-defined filter.

First of all, It is required both the directive server_traffic_status_zone in stream block and stream_server_traffic_status_zone in http block, and then if the directive stream_server_traffic_status_display is set, can be access to as follows:

• /status/format/json
  • If you request /status/format/json, will respond with a JSON document containing the current activity data for using in live dashboards and third-party monitoring tools.
• /status/format/html
  • If you request /status/format/html, will respond with the built-in live dashboard in HTML that requests internally to /status/format/json.
• /status/format/jsonp
  • If you request /status/format/jsonp, will respond with a JSONP callback function containing the current activity data for using in live dashboards and third-party monitoring tools.
• /status/format/prometheus
  • If you request /status/format/prometheus, will respond with a prometheus document containing the current activity data.
• /status/control
  • If you request /status/control, will respond with a JSON document after it reset or delete zones through a query string. See the Control.

JSON document contains as follows:

{
    "hostName": ...,
    "nginxVersion": ...,
    "loadMsec": ...,
    "nowMsec": ...,
    "connections": {
        "active":...,
        "reading":...,
        "writing":...,
        "waiting":...,
        "accepted":...,
        "handled":...,
        "requests":...
    },
    "sharedZones": {
        "name":...,
        "maxSize":...,
        "usedSize":...,
        "usedNode":...
    },
    "streamServerZones": {
        "...":{
            "port":...,
            "protocol":...,
            "connectCounter":...,
            "inBytes":...,
            "outBytes":...,
            "responses":{
                "1xx":...,
                "2xx":...,
                "3xx":...,
                "4xx":...,
                "5xx":...,
            },
            "sessionMsecCounter":...,
            "sessionMsec":...,
            "sessionMsecs":{
                "times":[...],
                "msecs":[...]
            },
            "sessionBuckets":{
                "msecs":[...],
                "counters":[...]
            }
        }
        ...
    },
    "streamFilterZones": {
        "...":{
            "...":{

                "port":...,
                "protocol":...,
                "connectCounter":...,
                "inBytes":...,
                "outBytes":...,
                "responses":{
                    "1xx":...,
                    "2xx":...,
                    "3xx":...,
                    "4xx":...,
                    "5xx":...,
                },
                "sessionMsecCounter":...,
                "sessionMsec":...,
                "sessionMsecs":{
                    "times":[...],
                    "msecs":[...]
                },
                "sessionBuckets":{
                    "msecs":[...],
                    "counters":[...]
                }
            },
            ...
        },
        ...
    },
    "streamUpstreamZones": {
        "...":[
            {
                "server":...,
                "connectCounter":...,
                "inBytes":...,
                "outBytes":...,
                "responses":{
                    "1xx":...,
                    "2xx":...,
                    "3xx":...,
                    "4xx":...,
                    "5xx":...
                },
                "sessionMsecCounter":...,
                "sessionMsec":...,
                "sessionMsecs":{
                    "times":[...],
                    "msecs":[...]
                },
                "sessionBuckets":{
                    "msecs":[...]
                    "counters":[...]
                },
                "uSessionMsecCounter":...,
                "uSessionMsec":...,
                "uSessionMsecs":{
                    "times":[...],
                    "msecs":[...]
                },
                "uSessionBuckets":{
                    "msecs":[...]
                    "counters":[...]
                },
                "uConnectMsecCounter":...,
                "uConnectMsec":...,
                "uConnectMsecs":{
                    "times":[...],
                    "msecs":[...]
                },
                "uConnectBuckets":{
                    "msecs":[...]
                    "counters":[...]
                },
                "uFirstByteMsecCounter":...,
                "uFirstByteMsec":...,
                "uFirstByteMsecs":{
                    "times":[...],
                    "msecs":[...]
                },
                "uFirstByteBuckets":{
                    "msecs":[...]
                    "counters":[...]
                },
                "weight":...,
                "maxFails":...,
                "failTimeout":...,
                "backup":...,
                "down":...
            }
            ...
        ],
        ...
    }
}

• main
  • Basic version, uptime((nowMsec - loadMsec)/1000)
  • nowMsec, loadMsec is a millisecond.
• connections
  • Total connections and requests(same as stub_status_module in NGINX)
• streamServerZones
  • Traffic(in/out) and request and response counts and status(1xx,2xx...) hit ratio per each server zone
  • Total traffic(In/Out) and request and response counts(It zone name is *) and hit ratio
• streamFilterZones
  • Traffic(in/out) and request and response counts and status(1xx,2xx...) hit ratio per each server zone filtered through the server_traffic_status_filter_by_set_key directive
  • Total traffic(In/Out) and request and response counts(It zone name is *) and hit ratio filtered through the server_traffic_status_filter_by_set_key directive
• streamUpstreamZones
  • Traffic(in/out) and request and response counts per server in each upstream group
  • Current settings(weight, maxfails, failtimeout...) in nginx.conf

The directive stream_server_traffic_status_display_format sets the default ouput format that is one of json,jsonp,html,prometheus. (Default: json)

Traffic calculation as follows:

• streamServerZones
  • in += requested_bytes
  • out += sent_bytes
• streamFilterZones
  • in += requested_bytes via the filter
  • out += sent_bytes via the filter
• streamUpstreamZones
  • in += requested_bytes via the ServerZones
  • out += sent_bytes via the ServerZones

All calculations are working in log processing phase of Nginx.

Caveats: this module relies on nginx logging system(NGX_STREAM_LOG_PHASE:last phase of the nginx stream), so the traffic may be in certain cirumstances different that real bandwidth traffic. Websocket, canceled downloads may be cause of inaccuracies. The working of the module doesn't matter at all whether the access_log directive "on" or "off". Again, this module works well on "access_log off".

Control

It is able to reset or delete traffic zones through a query string. The request responds with a JSON document.

• URI Syntax
  • /{status_uri}/control?cmd={command}&group={group}&zone={name}

http {

    stream_server_traffic_status_zone;

    ...

    server {

        server_name example.org;

        ...


        location /status {
            stream_server_traffic_status_display;
            stream_server_traffic_status_display_format html;
        }
    }                                                                                                                                                                                           }
}

stream {
    geoip_country    /usr/share/GeoIP/GeoIP.dat;

    server_traffic_status_zone;

    server_traffic_status_filter_by_set_key $geoip_country_code country::*;

    server {

        ...

    }

    ...

}

If it set as above, then the control uri is like example.org/status/control.

The available request arguments are as follows:

• cmd=<status|reset|delete>
  • status
    • It returns status of traffic zones to json format like status/format/json.
  • reset
    • It reset traffic zones without deleting nodes in shared memory.(= init to 0)
  • delete
    • It delete traffic zones in shared memory. when re-request recreated.
• group=<server|filter|upstream@alone|upstream@group|*>
  • server
  • filter
  • upstream@alone
  • upstream@group
  • *
• zone=name
  • server
    • name
  • filter
    • filter_group@name
  • upstream@group
    • upstream_group@name
  • upstream@alone
    • @name

To get status of traffic zones on the fly

This is similar to the status/format/json except that it can get each zones.

To get fully zones

• It is exactly the same with the status/format/json.
  • /status/control?cmd=status&group=*

To get group zones

• streamServerZones
  • /status/control?cmd=status&group=server&zone=*
• streamFilterZones
  • /status/control?cmd=status&group=filter&zone=*
• streamUpstreamZones
  • /status/control?cmd=status&group=upstream@group&zone=*
• streamUpstreamZones::nogroups
  • /status/control?cmd=status&group=upstream@alone&zone=*

To get each zones

• single zone in streamServerZones
  • /status/control?cmd=status&group=server&zone=name
• single zone in streamFilterZones
  • /status/control?cmd=status&group=filter&zone=filter_group@name
• single zone in streamUpstreamZones
  • /status/control?cmd=status&group=upstream@group&zone=upstream_group@name
• single zone in streamUpstreamZones::nogroups
  • /status/control?cmd=status&group=upstream@alone&zone=name

To reset traffic zones on the fly

It reset the values of specified zones to 0.

To reset fully zones

• /status/control?cmd=reset&group=*

To reset group zones

• streamServerZones
  • /status/control?cmd=reset&group=server&zone=*
• streamFilterZones
  • /status/control?cmd=reset&group=filter&zone=*
• streamUpstreamZones
  • /status/control?cmd=reset&group=upstream@group&zone=*
• streamUpstreamZones::nogroups
  • /status/control?cmd=reset&group=upstream@alone&zone=*

To reset each zones

• single zone in streamServerZones
  • /status/control?cmd=reset&group=server&zone=name
• single zone in streamFilterZones
  • /status/control?cmd=reset&group=filter&zone=filter_group@name
• single zone in streamUpstreamZones
  • /status/control?cmd=reset&group=upstream@group&zone=upstream_group@name
• single zone in streamUpstreamZones::nogroups
  • /status/control?cmd=reset&group=upstream@alone&zone=name

To delete traffic zones on the fly

It delete the specified zones in shared memory.

To delete fully zones

• /status/control?cmd=delete&group=*

To delete group zones

• streamServerZones
  • /status/control?cmd=delete&group=server&zone=*
• streamFilterZones
  • /status/control?cmd=delete&group=filter&zone=*
• streamUpstreamZones
  • /status/control?cmd=delete&group=upstream@group&zone=*
• streamUpstreamZones::nogroups
  • /status/control?cmd=delete&group=upstream@alone&zone=*

To delete each zones

• single zone in streamServerZones
  • /status/control?cmd=delete&group=server&zone=name
• single zone in streamFilterZones
  • /status/control?cmd=delete&group=filter&zone=filter_group@name
• single zone in streamUpstreamZones
  • /status/control?cmd=delete&group=upstream@group&zone=upstream_group@name
• single zone in streamUpstreamZones::nogroups
  • /status/control?cmd=delete&group=upstream@alone&zone=name

JSON

The following status information is provided in the JSON format:

Json used by status

/{status_uri}/format/json

/{status_uri}/control?cmd=status&...

• hostName
  • Host name.
• nginxVersion
  • Version of the provided.
• loadMsec
  • Loaded process time in milliseconds.
• nowMsec
  • Current time in milliseconds
• connections
  • active
    • The current number of active client connections.
  • reading
    • The total number of reading client connections.
  • writing
    • The total number of writing client connections.
  • waiting
    • The total number of wating client connections.
  • accepted
    • The total number of accepted client connections.
  • handled
    • The total number of handled client connections.
  • requests
    • The total number of requested client connections.
• sharedZones
  • name
    • The name of shared memory specified in the configuration.(default: stream_server_traffic_status)
  • maxSize
    • The limit on the maximum size of the shared memory specified in the configuration.
  • usedSize
    • The current size of the shared memory.
  • usedNode
    • The current number of node using in shared memory. It can get an approximate size for one node with the following formula: (usedSize / usedNode)
• streamServerZones
  • connectCounter
    • The total number of client requests received from clients.
  • inBytes
    • The total number of bytes received from clients.
  • outBytes
    • The total number of bytes sent to clients.
  • responses
    • 1xx, 2xx, 3xx, 4xx, 5xx
      • The number of responses with status codes 1xx, 2xx, 3xx, 4xx, and 5xx.
  • sessionMsecCounter
    • The number of accumulated request processing time in milliseconds.
  • sessionMsec
    • The average of request processing times in milliseconds.
  • sessionMsecs
    • times
      • The times in milliseconds at request processing times.
    • msecs
      • The request processing times in milliseconds.
  • sessionBuckets
    • msecs
      • The bucket values of histogram set by server_traffic_status_histogram_buckets directive.
    • counters
      • The cumulative values for the reason that each bucket value is greater than or equal to the request processing time.
• streamFilterZones
  • It provides the same fields with streamServerZones except that it included group names.
• streamUpstreamZones
  • server
    • An address of the server.
  • connectCounter
    • The total number of client connections forwarded to this server.
  • inBytes
    • The total number of bytes received from this server.
  • outBytes
    • The total number of bytes sent to this server.
  • responses
    • 1xx, 2xx, 3xx, 4xx, 5xx
      • The number of responses with status codes 1xx, 2xx, 3xx, 4xx, and 5xx.
  • sessionMsecCounter
    • The number of accumulated request processing times in milliseconds including upstream.
  • sessionMsec
    • The average of request processing times in millseconds including upstream.
  • sessionMsecs
    • times
      • The times in milliseconds at request processing times.
    • msecs
      • The request processing times in milliseconds including upstream.
  • sessionBuckets
    • msecs
      • The bucket values of histogram set by server_traffic_status_histogram_buckets directive.
    • counters
      • The cumulative values for the reason that each bucket value is greater than or equal to the request processing time.
  • uSessionMsecCounter
    • The number of accumulated the session duration time in milliseconds to the upstream server.
  • uSessionMsec
    • The average of the session duration times in milliseconds to the upstream server.
  • uSessionMsecs
    • times
      • The times in milliseconds at request processing times.
    • msecs
      • The session duration times in milliseconds to the upstream server.
  • uSessionBuckets
    • msecs
      • The bucket values of histogram set by server_traffic_status_histogram_buckets directive.
    • counters
      • The cumulative values for the reason that each bucket value is greater than or equal to the session duration time to the upstream server.
  • uConnectMsecCounter
    • The number of accumulated the time to connect to the upstream server.
  • uConnectMsec
    • The average of the times in milliseconds to connect to the upstream server (1.11.4).
  • uConnectMsecs
    • times
      • The times in milliseconds at request processing times.
    • msecs
      • The times in milliseconds to connect to the upstream server.
  • uConnectBuckets
    • msecs
      • The bucket values of histogram set by server_traffic_status_histogram_buckets directive.
    • counters
      • The cumulative values for the reason that each bucket value is greater than or equal to the time to connect to the upstream server.
  • uFirstByteMsecCounter
    • The number of accumulated the times in milliseconds to receive the first byte of data.
  • uFirstByteMsec
    • The average of the times in milliseconds to receive the first byte of data (1.11.4).
  • uFirstByteMsecs
    • times
      • The times in milliseconds at request processing times.
    • msecs
      • The times in milliseconds to receive the first byte of data (1.11.4).
  • uFirstByteBuckets
    • msecs
      • The bucket values of histogram set by server_traffic_status_histogram_buckets directive.
    • counters
      • The cumulative values for the reason that each bucket value is greater than or equal to the time to receive the first byte of data.
  • weight
    • Current weight setting of the server.
  • maxFails
    • Current max_fails setting of the server.
  • failTimeout
    • Current fail_timeout setting of the server.
  • backup
    • Current backup setting of the server.
  • down
    • Current down setting of the server.

Json used by control

/{status_uri}/control?cmd=reset&...

/{status_uri}/control?cmd=delete&...

• processingReturn
  • The result of true or false.
• processingCommandString
  • The requested command string.
• processingGroupString
  • The requested group string.
• processingZoneString
  • The requested zone string.
• processingCounts
  • The actual processing number.

Variables

The following embedded variables are provided in stream block:

• $sts_connect_counter
  • The total number of client requests received from clients.
• $sts_in_bytes
  • The total number of bytes received from clients.
• $sts_out_bytes
  • The total number of bytes sent to clients.
• $sts_1xx_counter
  • The number of responses with status codes 1xx.
• $sts_2xx_counter
  • The number of responses with status codes 2xx.
• $sts_3xx_counter
  • The number of responses with status codes 3xx.
• $sts_4xx_counter
  • The number of responses with status codes 4xx.
• $sts_5xx_counter
  • The number of responses with status codes 5xx.
• $sts_session_time
  • The average of request processing times.

Limit

It is able to limit total traffic per each server by using the directive server_traffic_status_limit_traffic. It also is able to limit all traffic by using the directive server_traffic_status_limit_traffic_by_set_key. When the limit is exceeded, the server will return the 503 (Service Temporarily Unavailable) error in reply to a request. The return code can be changeable.

To limit traffic for server

stream {

    server_traffic_status_zone;

    ...

    server {

        listen 1981;

        server_traffic_status_limit_traffic in:64G;
        server_traffic_status_limit_traffic out:1024G;

        ...
    }
}

• Limit in/out total traffic on the 1981/tcp to 64G and 1024G respectively.

To limit traffic for filter

stream {
    geoip_country /usr/share/GeoIP/GeoIP.dat;

    server_traffic_status_zone;

    ...

    server {

        listen 1981;

        server_traffic_status_filter_by_set_key $geoip_country_code country::$server_addr;
        server_traffic_status_limit_traffic_by_set_key FG@country::$server_addr@US out:1024G;
        server_traffic_status_limit_traffic_by_set_key FG@country::$server_addr@CN out:2048G;

        ...

    }
}

• Limit total traffic of going into US and CN on the example.org to 1024G and 2048G respectively.

To limit traffic for upstream

stream {

    server_traffic_status_zone;

    ...

    upstream backend {
        server 10.10.10.17:80;
        server 10.10.10.18:80;
    }

    server {

        listen 1981;

        server_traffic_status_limit_traffic_by_set_key UG@backend@10.10.10.17:80 in:512G;
        server_traffic_status_limit_traffic_by_set_key UG@backend@10.10.10.18:80 in:1024G;
        proxy_pass backend;

        ...

    }
}

• Limit total traffic of going into upstream backend on the 1981/tcp to 512G and 1024G per each peer.

Caveats: Traffic is the cumulative transfer or counter, not a bandwidth.

Use cases

It is able to calculate the user defined individual stats by using the directive server_traffic_status_filter_by_set_key.

To calculate traffic for individual country using GeoIP

stream {
    geoip_country /usr/share/GeoIP/GeoIP.dat;

    server_traffic_status_zone;
    server_traffic_status_filter_by_set_key $geoip_country_code country::*;

    ...

    server {

        ...

        server_traffic_status_filter_by_set_key $geoip_country_code country::$server_addr:$server_port;

    }
}

• Calculate traffic for individual country of total server groups.
• Calculate traffic for individual country of each server groups.

Basically, country flags image is built-in in HTML. The country flags image is enabled if the country string is included in group name which is second argument of server_traffic_status_filter_by_set_key directive.

Customizing

To customize after the module installed

1. You need to change the {{uri}} string to your status uri in status.template.html as follows:

shell> vi share/status.template.html

var vtsStatusURI = "yourStatusUri/format/json", vtsUpdateInterval = 1000;

2. And then, customizing and copy status.template.html to server root directory as follows:

shell> cp share/status.template.html /usr/share/nginx/html/status.html

4. Configure nginx.conf

   server {
       server_name example.org;
       root /usr/share/nginx/html;

       # Redirect requests for / to /status.html
       location = / {
           return 301 /status.html;
       }

       location = /status.html {}

       # Everything beginning /status (except for /status.html) is
       # processed by the status handler
       location /status {
           stream_server_traffic_status_display;
           stream_server_traffic_status_display_format json;
       }
   }

4. Access to your html.

http://example.org/status.html

To customize before the module installed

1. Modify share/status.template.html (Do not change {{uri}} string)

2. Recreate the ngx_http_stream_server_traffic_status_module_html.h as follows:

shell> cd util
shell> ./tplToDefine.sh ../share/status.template.html > ../src/ngx_http_stream_server_traffic_status_module_html.h

3. Add the module to the build configuration by adding

--add-module=/path/to/nginx-module-sts
--add-module=/path/to/nginx-module-stream-sts

4. Build the nginx binary.

5. Install the nginx binary.

Directives

stream_server_traffic_status

-	-
Syntax	stream_server_traffic_status
Default	off
Context	http, server, location

Description: Enables or disables the module working. If you set stream_server_traffic_status_zone directive, is automatically enabled.

stream_server_traffic_status_zone

-	-
Syntax	stream_server_traffic_status_zone [shared:name]
Default	shared:stream_server_traffic_status
Context	http

Description: Sets parameters for a shared memory zone specified by server_traffic_status_zone directive in stream block. Caveats: The name must be same as specified by server_traffic_status_zone.

stream_server_traffic_status_display

-	-
Syntax	stream_server_traffic_status_display
Default	-
Context	http, server, location

Description: Enables or disables the module display handler.

stream_server_traffic_status_display_format

-	-
Syntax	stream_server_traffic_status_display_format
Default	json
Context	http, server, location

Description: Sets the display handler's output format. If you set json, will respond with a JSON document. If you set html, will respond with the built-in live dashboard in HTML. If you set jsonp, will respond with a JSONP callback function(default: ngx_http_stream_server_traffic_status_jsonp_callback). If you set prometheus, will respond with a prometheus document.

stream_server_traffic_status_display_jsonp

-	-
Syntax	stream_server_traffic_status_display_jsonp callback
Default	ngx_http_stream_server_traffic_status_jsonp_callback
Context	http, server, location

Description: Sets the callback name for the JSONP.

stream_server_traffic_status_average_method

-	-
Syntax	stream_server_traffic_status_average_method  [period]
Default	AMM 60s
Context	http, server, location

Description: Sets the method which is a formula that calculate the average of response processing times. The period is an effective time of the values used for the average calculation.(Default: 60s) If period set to 0, effective time is ignored. In this case, the last average value is displayed even if there is no requests and after the elapse of time. The corresponding values are sessionMsec, uSessionMsec, uConnectMsec, uFirstByteMsec in JSON.

• AMM
  • The AMM is the arithmetic mean.
• WMA
  • THE WMA is the weighted moving average.

server_traffic_status

-	-
Syntax	server_traffic_status
Default	off
Context	stream, server

Description: Enables or disables the module working. If you set server_traffic_status_zone directive, is automatically enabled.

server_traffic_status_zone

-	-
Syntax	server_traffic_status_zone [shared:name:size]
Default	shared:stream_server_traffic_status:1m
Context	stream

Description: Sets parameters for a shared memory zone that will keep states for various keys. The cache is shared between all worker processes.

server_traffic_status_filter

-	-
Syntax	server_traffic_status_filter
Default	on
Context	stream, server

Description: Enables or disables the filter features.

server_traffic_status_filter_by_set_key

-	-
Syntax	server_traffic_status_filter_by_set_key key [name]
Default	-
Context	stream, server

Description: Enables the keys by user defined variable. The key is a key string to calculate traffic. The name is a group string to calculate traffic. The key and name can contain variables such as $host, $server_addr, $server_port. The name's group belongs to streamFilterZones if specified. The key's group belongs to streamServerZones if not specified second argument name. The example with geoip module is as follows:

stream {

      ...

      server {
          listen 1981;
          server_traffic_status_filter_by_set_key $geoip_country_code country::$server_addr:$server_port;

          ...

      }
}

  ...
  "streamServerZones": {
  ...
  },
  "streamFilterZones": {
      "country::example.org": {
          "KR": {
              "port":...,
              "protocol":...,
              "connectCounter":...,
              "inBytes":...,
              "outBytes":...,
              "responses":{
                  "1xx":...,
                  "2xx":...,
                  "3xx":...,
                  "4xx":...,
                  "5xx":...,
              },
              "sessionMsec":...
              "sessionMsecs":{
                  "times":[...],
                  "msecs":[...]
              },
            },
          },
          "US": {
          ...
          },
          ...
      },
      ...
  },
  ...

server_traffic_status_filter_check_duplicate

-	-
Syntax	server_traffic_status_filter_check_duplicate
Default	on
Context	stream, server

Description: Enables or disables the deduplication of server_traffic_status_filter_by_set_key. It is processed only one of duplicate values(key + name) in each directives(stream, server) if this option is enabled.

server_traffic_status_limit

-	-
Syntax	server_traffic_status_limit
Default	on
Context	stream, server

Description: Enables or disables the limit features.

server_traffic_status_limit_traffic

-	-
Syntax	server_traffic_status_limit_traffic member:size [code]
Default	-
Context	stream, server

Description: Enables the traffic limit for specified member. The member is a member string to limit traffic. The size is a size(k/m/g) to limit traffic. The code is a code to return in response to rejected requests.(Default: 503)

The available member strings are as follows:

• connect
  • The total number of client connects received from clients.
• in
  • The total number of bytes received from clients.
• out
  • The total number of bytes sent to clients.
• 1xx
  • The number of responses with status codes 1xx.
• 2xx
  • The number of responses with status codes 2xx.
• 3xx
  • The number of responses with status codes 3xx.
• 4xx
  • The number of responses with status codes 4xx.
• 5xx
  • The number of responses with status codes 5xx.

server_traffic_status_limit_traffic_by_set_key

-	-
Syntax	server_traffic_status_limit_traffic_by_set_key key member:size [code]
Default	-
Context	stream, server

Description: Enables the traffic limit for specified key and member. The key is a key string to limit traffic. The member is a member string to limit traffic. The size is a size(k/m/g) to limit traffic. The code is a code to return in response to rejected requests.(Default: 503)

The key syntax is as follows:

• group@[subgroup@]name

The available group strings are as follows:

• NO
  • The group of server.
• UA
  • The group of upstream alone.
• UG
  • The group of upstream group.(use subgroup)
• FG
  • The group of filter.(use subgroup)

The available member strings are as follows:

• connect
  • The total number of client requests received from clients.
• in
  • The total number of bytes received from clients.
• out
  • The total number of bytes sent to clients.
• 1xx
  • The number of responses with status codes 1xx.
• 2xx
  • The number of responses with status codes 2xx.
• 3xx
  • The number of responses with status codes 3xx.
• 4xx
  • The number of responses with status codes 4xx.
• 5xx
  • The number of responses with status codes 5xx.

The member is the same as server_traffic_status_limit_traffic directive.

server_traffic_status_limit_check_duplicate

-	-
Syntax	server_traffic_status_limit_check_duplicate
Default	on
Context	stream, server

Description: Enables or disables the deduplication of server_traffic_status_limit_by_set_key. It is processed only one of duplicate values(member | key + member) in each directives(stream, server) if this option is enabled.

server_traffic_status_average_method

-	-
Syntax	server_traffic_status_average_method  [period]
Default	AMM 60s
Context	stream, server

Description: Sets the method which is a formula that calculate the average of response processing times. The period is an effective time of the values used for the average calculation.(Default: 60s) If period set to 0, effective time is ignored. In this case, the last average value is displayed even if there is no requests and after the elapse of time. The corresponding value is only $sts_session_time variable.

• AMM
  • The AMM is the arithmetic mean.
• WMA
  • THE WMA is the weighted moving average.

Caveats: The $sts_session_time variable is the value calculated at the time of the last request. It is not calculated when using variables.

server_traffic_status_histogram_buckets

-	-
Syntax	server_traffic_status_histogram_buckets second ...
Default	-
Context	stream

Description: Sets the observe buckets to be used in the histograms. By default, if you do not set this directive, it will not work. The second can be expressed in decimal places with a minimum value of 0.001(1ms). The maximum size of the buckets is 32. If this value is insufficient for you, change the NGX_STREAM_SERVER_TRAFFIC_STATUS_DEFAULT_BUCKET_LEN in the nginx-mdule-stream-sts/src/ngx_stream_server_traffic_status_node.h and the NGX_HTTP_STREAM_SERVER_TRAFFIC_STATUS_DEFAULT_BUCKET_LEN in the nginx-module-sts/src/ngx_http_stream_server_traffic_status_node.h.

For examples:

• server_traffic_status_histogram_buckets 0.005 0.01 0.05 0.1 0.5 1 5 10
  • The observe buckets are [5ms 10ms 50ms 1s 5s 10s].
• server_traffic_status_histogram_buckets 0.005 0.01 0.05 0.1
  • The observe buckets are [5ms 10ms 50ms 1s].

Caveats: By default, if you do not set this directive, the histogram statistics does not work.

See Also

• nginx-module-stream-sts
• nginx-module-vts